Titanium Product List
Angles
Angle
1/16″ Thick (and above) x 3/8″ Wide (and above) x Length (various)
Billet
Round Billet
4-1/2″ Dia. to 17″ Dia. and above x RL
Square Billet
4″ Sq. (and above) x RL
Bar
Round Bar
.160″ Dia. to under 4-1/2″ Dia. x RL
Rod
Threaded Rod
6-32 through 1-8 x 10′ to 12′ RL
[Other sizes available on request.]
Threaded Stud
6-32 through 1-8 x Specified Lengths
[Other sizes available on request. Refer to Threaded Rod Sizes]
Fasteners
Hex Head Bolt
8-32 through 3/4-10 Lengths through 4″
[Other sizes available on request.]
Flat Head Slotted Machine Screw
#6 through #10 and 1/4″ through 1/2″ x 3/8″ through 2-1/2″ Long
[Other sizes available on request.]
Flat Head Phillips Machine Screw
#8 through #10 and 5/16″ through 1/2″ x 3/8″ through 2-1/2″ Long
[Other sizes available on request.]
Pan Head Phillips Machine Screw
#6 through #10 and 1/4″ through 5/16″ x 3/16″ through 1-1/2″ Long
[Other sizes available on request.]
Pan Head Slotted Machine Screw
#6 through #10 and 1/4″ through 5/16″ x 3/16″ through 1-1/2″ Long
[Other sizes available on request.]
Round Head Slotted Machine Screw
#6 through #10 and 1/4″ x 1/4″ through 1-1/2″ Long
[Other sizes available on request.]
Round Head Phillips Machine Screw
#8 through #10 and 1/4″ x 3/8″ through 1″ Long
[Other sizes available on request.]
Hex Socket Set Screw
#6 through #10 and 1/4″ through 1/2″ x 3/8″ through 1″ Long
[Other sizes available on request.]
Hex Socket Cap Screws
#4 through #10 and 1/4″ through 1/2″
[Lengths dependent upon diameter]
Hex Nut
8-32 through 3/4-10 Lengths through 4″
[Other sizes available on request.]
Flat Washer
#8 through 3/4″ [Other sizes on request]
Lock Washer
#8 through 3/4″ [Other sizes on request]
Threaded Rod
6-32 through 1-8 x 10′ to 12′ RL
[Other sizes available on request.]
Fittings
Elbow Long Radius Butt-Welding 90°
1/2″ through 48″ NPS Sch 1OS and 40S
[Other Sizes and Schedules available on request.]
Elbow Short Radius Butt-Welding 90°
1″ through 24″ NPS Sch 1OS and 40S
[Other Sizes and Schedules available on request.]
Elbow Threaded 90°
1″ through 4″ NPS
Elbow Threaded 45°
1″ through 4″ NPS
Elbow Long Radius Butt- Welding 45°
1/2″ through 48″ NPS Sch 10S and 40S
[Other Sizes and Schedules available on request.]
Concentric Reducer
3/4″ x 1/2″ through 36″ x 34″ NPS
Sch 10S and Sch 40S
[Other Schedules available on request.]
Eccentric Reducer
3/4″ x 1 1/2″ through 36″ x 34″ NPS (ANSI)
Sch 10S and Sch 40S
3/4″ x 1/2″ through 24″ x 20″ NPS (MSS)
Sch 1OS and Sch 40S
[Other Schedules available on request.]
Lap Joint Stub End – Short Pattern
1/2″ through 24″ NPS (ANSI & MSS)
Sch 10S and 40S
[Other Schedules available on request.]
Lap Joint Stub End – Long Pattern
l/2″ through 24″ NPS (ANSI) Sch 1OS and 40S
[Other Schedules available on request.]
Butt Welding Short Branch Straight Tee
1/2″ through 24″ NPS (MSS) Sch 10S and 40S
[Other Schedules available on request.]
Butt Welding Long Branch Straight Tee
1/2″ through 48″ NPS (ASME) Sch 10S and Sch 40S
1/2″ through 24″ NPS (MSS) Sch 10S and Sch 40S
[Other Schedules available on request.]
Butt Welding Reducing Outlet Tee
1/2″ x 1/2″ x 1/4″ through 48″ x 48″ x 46″ NPS
Sch 10S and Sch 40S (ASME)
3/4″ x 3/4″ x 1/2″ through 24″ x 24″ x 20″ NPS
Sch 10S and Sch 40S (MSS)
[Other Schedules available on request.]
Threaded Tee
1/2″ through 4″ NPS
Pipe Union
1/4″ through 1-1/2″ NPS 3000# Pattern
[Other sizes and Patterns available on request.]
Threaded Stud
6-32 through 1-8 x Specified Lengths
[Other sizes available on request. Refer to Threaded Rod Sizes]
Socket Welding Outlet
Outlets: 1/4″ through 18″ NPS
Pipe Run:1/4″ through 30″ NPS
Threaded Outlet
Outlets: 1/4″ through 18″ NPS
Pipe Run:1/4″ through 34″ NPS
Buttwelding Outlet
Outlets: 1/4″ through 18″ NPS
Pipe Run:1/4″ through 30″ NPS
Hex Head Bushing
1/8″ through 4″ NPS
Weld Cap
1/2″ to 48″ NPS x Sch 10S and Sch 40S
[Other Schedule sizes available on request.]
Threaded Pipe Cap
1/8″ to 4″ NPS Class 3000 and Class 6000
[Also referred to as 3000# & 6000# Patterns]
Full Coupling (Threaded)
1 1/8″ through 4″ NPS
Half Coupling (Threaded)
1 1/8″ through 4″ NPS
Pipe Nipple
1/8″ through 2″ Sch 40S
[Other sizes available on request.]
Hex Head Pipe Plug (Threaded)
1/8″ through 4″ NPS
Square Head Pipe Plug (Threaded)
1/8″ through 4″ NPS
Flanges
Blind Flange (Raised Face)
1/2″ through 24″ NPS (ANSI)
12″ through 60″ (MSS)
Class 150 through Class 2500
Slip-On Flange (Raised Face)
1/2″ through 24″ NPS
[Larger Sizes available on request]
Weld Neck Flange (Raised Face) (Ring-Type Joint)
1/2″ through 60″ NPS (ANSI) [Raised Face only]
Class 150 through Class 2500
12″ through 60″ NPS (MSS)
Class 150 through Class 900 [Raised Face]
Class 300 through Class 900 [Ring-Type Joint]
Threaded Flange
1/2″ through 24″ NPS. Class 150 through 1500
(to 12″ NPS max. for Class 2500)
[Larger Sizes available on request]
Figure 8 Blanks (Spectacle Blinds)
½” through 24” NPS ASME
Class 150 through Class 2500
Spectacle Blinds
1” through 24” NPS
The Pipe Fitters Blue Book
150# and 300#
Pipe
Seamless Pipe
1/8″ NPS through 6″ NPS
Sch 10S and Sch 40S x 20′ RL max.
[Other Schedule sizes available on request]
Welded Pipe
3/4″ NPS through 24″ NPS Sch 10S and Sch 40S x 20′ RL max.
[May be Continuous Rolled & Welded to 8" Sch 40S or Brake Press formed and Welded from 6" NPS and above.]
[Other Schedule sizes available on request]
Tube
Seamless Tube
OD – 1/8″ (3.18 mm) to 1-1/2″ (38.1mm)
Wall – .016″ (4 mm) to .065″ (1.65 mm)
[Other OD Sizes and Walls available on request.]
Welded Tube
OD – 1/2″ (12.7 mm) to 2″ (50.8 mm)
Wall – .028″ (.71 mm) to .065″ (1.65 mm)
[Other OD Sizes and Walls available on request.]
Plate
Plate
.1875″ to 3″ x up to 96″ Wide x to 240 “Long
[Wider Widths, Custom and Special Shapes (Circles, Rectangles, Squares, Other) available on request.]
Sheet
Sheet
.020″ to under .187″ x up to 48″ Wide x Length
Standard sizes: 48″ Wide X 120″ Long
[Sheet can be sheared to any Custom size.]
Wire
Round Wire
.063″OD through .214″ OD x 10′ / 12′ RL
Weld Wire
.035″ OD through .156″ OD x 36″ Long
Forgings
Forged Bar
To approx. 20”OD
< 8” OD = 30’ >8” OD – 12” OD = 33’
20” OD = 16’ Max Lengths
Cut-to-size lengths available
[Other Sizes Available On Request]
Forged Blank
2” to approx. 70” OD or Width x Length
[Other Sizes Available On Request]
Forged Block
Squares or Rectangles to approx. 70” Wide
[Other Sizes Available On Request]
Forged Disc
2” to 110” OD
[Other Sizes Available On Request]
Forged Ring
2” to 110” OD
[Other Sizes Available On Request]
Forged Shaft
To approx. 20” OD; Length max. = 450”
[Other Sizes Available On Request]
Forged Sleeve
To approx 70” OD
[Other Sizes Available On Request]
Forged Tube Sheet Blank
2” to approx. 70” OD or Width
[Other Sizes Available On Request]
Seamless Rolled Ring
To approx. 160” OD; Face Height (max.) = 30”
[Other Sizes Available On Request]
Targets
Sputtering Target Tubes
(All configurations available on request)
Metals: Ti, Zr, Al, Nb, Ta, Cu, Bronze, Ni, Stainless
(Other metals available on request)
Clamp Down Sputtering Targets
Plate
(All configurations available on request)
Metals: Ti, Zr, Al, Nb, Ta, Zn, Cu, Bronze, Hf, Ag, Sn, Cr, W, Ni, Nickel Alloys, Mo, Stainless
(Other metals available on request)
Bonded Sputtering Targets
Plate
(All configurations available on request)
Metals: Ti, Zr, Al, Nb, Ta, Cu, Bronze, Hf, Ag, Sn, Cr, W, Ni, Nickel Alloys, Mo, Stainless
(Other metals available on request)
Bolt Down Sputtering Targets
Plate
(All configurations available on request)
Metals: Ti, Zr, Al, Nb, Ta, Cu, Bronze, Hf, W. Ni, Nickel Alloys, Mo, Stainless
(Other metals available on request)
